• For turnaround from baseband SDI to uncompressed IP, and vice-versa, SDI2X is the SDI-over-IP (ST-2022, ST-2110) converter box for up to 4x SDI channels in 1RU or 2RU Opengear chassis types. SDI2X can bridge the gap between baseband SDI infrastructure and modern high-speed, uncompressed IP networks. Utilizing SMPTE 2110 and SMPTE 2022-6, SDI2X provides an easy-to-use, robust turnaround platform for sending and receiving uncompressed IP

•  IP Monitoring Software Probe, VB330-V / VB330: The VB330-V/VB330 Appliance is designed for monitoring the full cross-section of services commonly found in media-related network operations. It is a very flexible tool for monitoring network performance involving signal formats and areas as diverse as video TS over IP multicast, video OTT/ABR streaming, voice trunks, video-on-demand unicast, Ethernet packet microbursts, PCAP recording, and general traffic protocol inspection.

• Stage Racer2 ：The STAGE RACER2 brings optical fiber transmission to a whole new Lebel. Thanks to it decentralized networking capabilities, more ground can be covered on very long distances and all signals can be managed from anywhere on the network.For remote production applications, It’s a perfect bridge between baseband and IP world with ST-2110 future compliance.Stage Racer 2 is designed to accept all kinds of signals without external adapter allowing fast routing / distribution to all other units of the network.
  If you’re looking for glue features, Stage Racer 2 also offers processing capabilities with Audio Embedding/Deembedding, Audio SRC, Frame buffering and much more..

  All this is in a single 1RU Frame!

• CAM Racer 8K ：The CAM Racer is a complete camera fiber optic transmission solution for OB Van, Studio and Cinema applications. It comprises a camera dockable transceiver and a 1RU base station unit. The CAM Racer is designed to transport all needed signals in the same device on 2 signal mode fibers of a standard SMPTE cable.

  With up to 4 x 12G-SDI channels, the CAM Racer will fit any camera from ENG to 8K Cinema devices.

• Topas 4K is specially designed and shaped to complete perfectly the UE150.
  The mechanical interface of the transmitter enclosure has been precisely cut so it matches the camera bottom and mounting bracket for quick and easy installation while staying visually discrete.

• BarnColor, is a cost-effective solution for bidirectional transmission of multiple signals over fiber optic cables. Up to four different color units can be cascaded to each other; the system supports up to 16 transceiver cages on each side and allows the transport of 32 signal feeds; 16 feeds forward and 16 returns. It does not require complicated settings like conventional optical transmission equipment and can be set and operated even by those who do not have specialized knowledge or experience.

Examples of SFPs being used:

• PtP (1310) 
• Multimode
• BNC-SFP
• HDMI-SFP
• Analog Video-SFP
• IP encap/decap-SFP
• RJ45 for ethernet

• Calian Decimator D4 Spectrum & Signal Analyzer allows you to remotely monitor RF communication signals and detect signal problems anywhere in the world using a standard Internet connection.

• The Illuminator allows you to monitor multiple remote Decimator D4/D3 spectrum analyzers on a single screen. The on-screen display will enable you to centrally monitor and control the entire carrier and monitor abnormalities such as band power, carrier presence, center frequency, and carrier power.